Yealink VC800 User Manual

User Guide for the VC800 Video Conferencing System
58
- Swipe down from the top of the CP960’s touch screen to enter the control center.
Tap to set the ringer volume to 0.
Note
To adjust the volume when the system is during a call:
- Press or on the remote control to adjust the receiver volume of the system.
The current receiver volume of the system is displayed on the left of the display device.
- Press volume key on the CP960 conference phone to adjust the receiver volume of the
system.
If ringer volume is adjusted to 0, the icon will appear on the display device. The icon
will appear on the CP960’s touch screen.

Yealink VC800 Specifications

General

Brand	Yealink
Model	VC800
Category	Conference System
Language	English