4-4
IM WT5000-02EN
Setting Independent Integration (Independent Control)
4.
Tap Independent Control. Element numbers appear.
5.
Tap within the element number display frame. The following screen appears.
Computation/Output tab
Set the integration conditions.
Select the input elements that you want
independent integration to be performed on.*
Selects all input elements
Clears all input elements
Even if you select input elements that independent integration will be performed on, independent
integration may not be performed due to the wiring system setting or the independent input element
configuration (see the features guide).
Element number display
Setting the Watt-Hour Integration Method for Each Polarity (WP±
Type)
4.
Tap WP± Type. The following screen appears.
Select the integration method setup method (Each, All).
When you select Each, you can set the integration method for each input element.
Set the integration method.
(Charge/Discharge, Sold/Bought)
4.1 Setting Integration Conditions
To Next Page
Loading...
Need help?
General
