YOKOGAWA WT5000 User Manual

16-11
IM WT5000-02EN
16.8 Displaying the Message Log
► “Message Log Display (Message Log)” in the features guide
This section explains operating procedures using the following setup methods.
• Procedure Using the Setup Menu (see chapter 1)
• Procedure Using the Keys (other than SETUP) (see section 1.2 in IM WT5000-03EN)
Procedure Using the Setup Menu
1.
Tap the Setup icon , or press MENU under SETUP.
2.
Tap the Utility tab. The utility settings overview screen appears.
Pressing ESC closes the overview screen.
Message Log Display (Message Log)
3.
Tap Message Log. A list is displayed containing all the messages that were indicated on the
screen since the instrument was started.
Utility tab
Displays the message log
Message log
Clears the message log
You can also tap the message log indicator in the upper left of the screen to display the list of
messages.
Note
You can also display the utility settings overview screen by moving the cursor on the Utility tab using the
arrow keys and then pressing SET.
Procedure Using Keys
See section 16.1.

YOKOGAWA WT5000 Specifications

General

Brand	YOKOGAWA
Model	WT5000
Category	Measuring Instruments
Language	English