To Next Page

To Previous Page

2-3

IM WT5000-02EN

2.2 Setting the Voltage Range and Current Range

► “Voltage Range (Voltage, VOLTAGE RANGE)” in the features guide

► “Auto Voltage Range (Auto (Voltage), AUTO)” in the features guide

► “Current Range (Current, CURRENT RANGE)” in the features guide

► “Auto Current Range (Auto (Current), AUTO)” in the features guide

► “Current Measurement Terminal (Terminal)” in the features guide

This section explains operating procedures using the following setup methods.

• Procedure Using the Setup Menu (see chapter 1)

• Procedure Using the Menu Icons (see page iii)

• Procedure Using the Keys (other than SETUP) (see section 1.2 in IM WT5000-03EN)

Procedure Using the Setup Menu

Tap the Setup icon , or press MENU under SETUP.

Tap the Input (Basic) tab. An input settings (basic measurement conditions) overview screen

appears.

Pressing ESC closes the overview screen.

Input (Basic) tab

When the input element is 760901 or 760902 When the input element is 760903

Set the voltage

range.

Set the current range (when the

input element is 760901 or 760902).

Set the current range (when the

input element is 760903).

Note

You can also display the input settings (basic measurement conditions) overview screen by moving the

cursor on the Input (Basic) tab using the arrow keys and then pressing SET.

YOKOGAWA WT5000 User Manual

Other manuals for YOKOGAWA WT5000