To Next Page

To Previous Page

7-8

IM WT5000-02EN

7.3 Setting the Data Storage Destination

► “File Save Conditions” in the features guide

This section explains operating procedures using the following setup methods.

• Procedure Using the Setup Menu (see chapter 1)

• Procedure Using the Menu Icons (see page iii)

• Procedure Using the Keys (other than SETUP) (see section 1.2 in IM WT5000-03EN)

Procedure Using the Setup Menu

Tap the Setup icon , or press MENU under SETUP.

Tap Computation/Output tab. A computation and output settings overview screen appears.

Pressing ESC closes the overview screen.

Configuring the Storage (Store)

Tap Store.

A storage setup screen appears.

Set the file name.

(See section 8.2.)

Set comments.

(see section 8.2)

Computation/Output tab

Configure the storage.

Select whether to perform automatic CSV

conversion when storage ends.

Set auto naming (see section 8.2).

Set the save destination

(see section 8.2).

Note

You can also display the computation/output settings overview screen by moving the cursor on the

Computation/Output tab using the arrow keys and then pressing SET.

YOKOGAWA WT5000 User Manual

Other manuals for YOKOGAWA WT5000