To Next Page

To Previous Page

16-6

IM WT5000-02EN

16.4 Setting the Message, Menu, and USB Keyboard

Languages

► “System Configuration (System Configuration)” in the features guide

This section explains operating procedures using the following setup methods.

• Procedure Using the Setup Menu (see chapter 1)

• Procedure Using the Keys (other than SETUP) (see section 1.2 in IM WT5000-03EN)

Procedure Using the Setup Menu

Tap the Setup icon , or press MENU under SETUP.

Tap the Utility tab. The utility settings overview screen appears.

Pressing ESC closes the overview screen.

Setting the Language and USB Keyboard (Language, USB

Keyboard)

Tap System Configuration. A system setup (Date/Time, Language, LCD, Preference) appears.

Utility tab

Configure the system.

Set the menu language.

The available languages vary depending on the suffix code.

LCD

(See section 16.5.)

Set the language of the messages shown on

the screen.

The available languages vary depending on the

suffix code.

Preference screen

(See section 16.6.)

Set the USB keyboard language.

The available languages vary depending on the suffix code.

Note

You can also display the utility settings overview screen by moving the cursor on the Utility tab using the

arrow keys and then pressing SET.

Procedure Using Keys

See section 16.1.

YOKOGAWA WT5000 User Manual

Other manuals for YOKOGAWA WT5000