YOKOGAWA WT5000 User Manual

15-3
IM WT5000-02EN
15.2 Configuring the TCP/IP Settings
► “TCP/IP (TCP/IP)” in the features guide
This section explains operating procedures using the following setup methods.
• Procedure Using the Setup Menu (see chapter 1)
• Procedure Using the Keys (other than SETUP) (see section 1.2 in IM WT5000-03EN)
Procedure Using the Setup Menu
1.
Tap the Setup icon , or press MENU under SETUP.
2.
Tap the Utility tab. The utility settings overview screen appears.
Pressing ESC closes the overview screen.
3.
Tap Network. An Ethernet setup screen (TCP/IP, FTP/Web Server, Net Drive, SNTP) appears.
Configuring the TCP/IP Settings (TCP/IP)
4.
Tap TCP/IP. A TCP/IP screen appears.
Utility tab
Configure the Ethernet.
Configure TCP/IP.
Configure the FTP server (see section 15.3).
Configure the Web server (see section 15.4).
Configure the network drive (see section 15.5).
Configure SNTP (date and time)
(see section 15.6).
Set these when DHCP is set to OFF.
• IP address
• Subnet mask
• Default gateway
Set the DHCP (OFF, ON).
DNS server IP address
(Server 1: primary, Server 2: secondary)
1 Configure DNS.
• OFF: DNS is disabled.
• ON: DNS is enabled.
Set the domain name, and the DNS server's primary and secondary IP addresses and domain
suffixes.
• Auto: DNS is enabled.
Set the domain suffix. The domain name and the DNS server IP addresses are set automatically.
The Auto option is only displayed when DHCP is set to ON.
Set the DNS (OFF, ON, Auto).
1
Domain suffix
(Suffix 1: primary, Suffix 2: secondary)
Applies the
settings
Domain name
(up to 32 characters)

YOKOGAWA WT5000 Specifications

General

Brand	YOKOGAWA
Model	WT5000
Category	Measuring Instruments
Language	English