6-16
IM WT5000-02EN
Example of a Vector Split Display
Select Graph/Graph according to “Setting the Screen Display” in section 6.1. On the split display,
only the vectors of Item No.1 are displayed, so select the vectors to show in the second screen
according to the group settings described earlier. If you select single screen display for Graph in
“Setting the Screen Display” in section 6.1, you can also show the same split display by performing
the procedure in “Setting the Display Format (Form)” described below.
Set the display to Graph/Graph.
Set Graph of Group2 to Vector.
Example of Item No. set to 1 and Object set to ΣB
(see “Switching the Displayed Items (Items)” on the previous page)
Set Graph of Group1 to Vector.
Example of Item No. set to 1 and Object set to ΣA
(see “Switching the Displayed Items (Items)” on the previous page)
Setting the Display Format (Form)
Set whether to show numeric data on the Graph screen.
6.
Tap Form. A Vector Form screen appears.
Closes the menu
Set the numeric data display
(OFF, ON).
Set the number of divisions on
the vector screen (Single, Dual).
To divide the vector screen, in “Switching the
Displayed Items (Items)” on page 6-15, set the
object each Item No. to the item you want to
show.
Set this to 1. Set this to 2.
Setup example
6.5 Vector Display
To Next Page
Loading...
Need help?
General
