12-6
IM WT5000-02EN
Setting the Graph Display Type (Graph)
4.
Tap Graph to select Bar.
Note
For instructions on how to display the waveforms, see sections 6.1 and 6.4.
Displaying the Cursors (Cursors)
5.
Tap Cursors. The following screen appears.
Closes the menu
Cursor display (OFF, ON)
Set the harmonic order of the bar graph to measure with cursor 1 (+)
(0, dc to 500).
Set the harmonic order of the bar graph to measure with cursor 2 (×)
(0, dc to 500).
Cursor movement linking (OFF, ON)
Procedure Using the Menu Icons
You can also use the menu icons shown on the right side of the screen to switch the displayed items.
1.
Tap the Display menu icon . A Display menu appears in the sub menu area on the right side
of the screen.
By tapping the displayed items, you can specify the same operation as explained in “Switching the
Displayed Items” described earlier.
Note
For details on the Display menu, see page iv.
12.3 Cursor Measurement on Bar Graphs
To Next Page
Loading...
Need help?
General
