iv
IM WT5000-02EN
Display Icon
Use this icon to change the display format of the screen.
Display Menu
Selects the screen display
Shows only the numeric or graphic screen in a single screen or splits the screen
into top and bottom halves and shows the selected screen in each half.
(See sections 3.1 or 6.1.)
Set the numeric display format (All Items, 4 Items, 8 Items, 16 Items, Matrix,
Hrm List Single, Hrm List Dual, User).
Set how many measurement results to display in a single screen. Hrm List Single
and Hrm List Dual are harmonic list displays (see section 5.2). If you select User, set
the numeric value position, color, and so on according to the loaded background
Switches the displayed items
Switch the measured values (measurement function) shown in the screen.
Switches the displayed page (Page Up/Page Down)
Switches the numeric data screen shown in each display format.
This is the same as tapping ▲ and ▼ on the measurement display screen
(see section 3.2).
Set the graph display format (Wave, Trend, Bar, Vector) (see sections 6.2 to 6.5).
Switch the displayed group (Group1 to Group4)(see sections 6.2 to 6.5).
Set the display format (see sections 6.2 to 6.5).
Set the divisions and time scale of the graph screen.
Switches the graph display items (see sections 6.2 to 6.5)
Select the voltage, current, or other graph to show on the screen.
Cursor measurement (see chapter 12)
Displays trend values (see section 6.3)
Displays the current trend values. You can set this when the graph display format
is Trend.
Selects the display page to switch (Hrm List Single or Hrm List Dual)
Header: Switches the pages in the measurement function display area
List: Switches the pages in the harmonic data display area (See section 3.1.)
Register the custom display (see section 3.8).
Menu Icons
To Next Page
Loading...
Need help?
General
