3-13
IM WT5000-02EN
Switching the Displayed Items (Items)
You can switch the measured value (measurement function) shown in the screen.
3.
Tap Display.
A display format setup screen (Numeric/Graph) appears. For details, see section 3.1.
4.
Tap Items. The following screen appears.
Closes the menu
Set the displayed item.
You can set the following items for displaying apparent power, reactive power,
and corrected power.
Computed apparent power value (Power group):
S (apparent power), Sfnd (fundamental apparent power)
Computed reactive power value (Power group):
Q (reactive power), Qfnd (fundamental reactive power)
Computed corrected power value (Power group):
Pc (Corrected Power)
Procedure Using the Menu Icons
You can also use the menu icons shown on the right side of the screen to switch the displayed items.
1.
Tap the Display menu icon . A Display menu appears in the sub menu area on the right side
of the screen.
By tapping the displayed items, you can specify the same operation as explained in “Switching the
Displayed Items” described earlier.
Note
For details on the Display menu, see page iv.
3.3 Displaying Apparent Power, Reactive Power, and Corrected Power
To Next Page
Loading...
Need help?
General
