Tools and Calendar 125
3. Make sure that the headset is discoverable, so that your phone can find the headset.
Refer to the instructions that came with the headset to find out how to set it to
discoverable mode.
4. Touch SEARCH FOR DEVICES. Your phone will start to scan for Bluetooth devices
within range.
5. When you see the name of your headset displayed in the AVAILABLE DEVICES section,
touch the name. Your phone then automatically tries to pair with the headset.
6. If automatic pairing fails, enter the passcode supplied with your headset.
The pairing and connection status is displayed below the hands-free headset or car kit name.
When the Bluetooth headset or car kit is connected to your phone, the Bluetooth connected icon
is displayed in the status bar. Depending on the type of headset or car kit you have
connected, you can then start using the headset or car kit to listen to music or make and receive
phone calls.
Note: Due to different specifications and features of other Bluetooth-compatible devices, display
and operations may be different, and functions such as transfer or exchange may not be
possible with all Bluetooth-compatible devices.
Reconnect a Headset or Car Kit
When you have paired a headset with your phone, you should be able to reconnect it
automatically by turning on Bluetooth on your phone and then turning on the headset. However,
sometimes you will need to reconnect manually, for example if you have been using your
headset with another Bluetooth device.
1. Touch > > Settings > Bluetooth.
2. If Bluetooth is not switched on, touch the on/off slider to turn Bluetooth on.
3. Make sure that the headset is discoverable.
4. Touch the headset’s name in the Bluetooth menu.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset or car kit
documentation to find the passcode.
6. If you still cannot reconnect to the headset or car kit, follow the instructions in Disconnect
or Unpair from a Bluetooth Device, and then follow the instructions in Connect a
Bluetooth Headset or Car Kit.
Disconnect or Unpair from a Bluetooth Device
You can manually disconnect or unpair from a Bluetooth device through the Bluetooth settings
menu.
To Next Page
Loading...
Need help?
General
