ZXR10 WAS (V1.0) W140A Outdoor Wireless Access Point / Bridge User’s Manual
2-2
● It provides data authentication and security management, supports 64-bit and
128-bit WEP encryption, provides mixed encryption for more flexible security.
● Automatic consistent correction system provides Automatic Scale Back
Functionality (ASBF) to automatically correct WLAN to the best connection
quality.
● High interoperability: the uplink interface is 10/100M adaptive Ethernet
interface, which can be connected through a network cable to the 10/100 Mbps
Ethernet in compliance with IEEE 802.3 network protocol.
● The uplink Ethernet interface provides VLAN trunk function, wireless access
users can be grouped into VLAN through MAC addresses, and W140As can be
grouped under the management VLAN.
● The version upgrade function upgrades the W140A software version and
supports remote online version loading.
● The embedded SNMP Agent supports SNMP v1/v2 to implement MIB II,
IEEE802dot11-MIB, IF-MIB, EtherLike-MIB and private MIB.
● Command line and WEB configuration modes are available for W140A
configuration, supporting remote uploading and downloading of configuration
files.
● Integrated management server is provided to monitor and manage ZTE wireless
network equipment, including W140A, in the distributed environment.
● The reliability design complies with IEC 60529 Standard, waterproof
performance reaches level 8, and dustproof performance reaches level 6.
● There is a dedicated lightning protection board the input terminal. For the
Ethernet part, the lightning strike surge tolerance is 2 kV between line and
ground and 1 kV between line and line. For the power supply part, the surge
tolerance should be 4 kV between line and ground and 2 kV between line and
line.
2.3 Technical Characteristics and Parameters
The technical indices of W140A are shown in Table 2.3-1.
To Next Page
Loading...
Need help?
General
