Zte ZXR10 User Manual

5-1
5 Command Line Configuration
This chapter describes the operation methods and configuration commands of the
W140A command line configuration.
5.1 Overview
The W140A provides the Command Line Interface (CLI) for configuring the W140A
data.
The CLI configuration of the W140A has the following features:
1. The CLI configuration of the W140A allows users to perform configuration
through the Ethernet interface and wireless network card in the Telnet mode.
2. The CLI provides five command modes: User, privileged, configure, Ethernet
interface configuration and wireless interface configuration modes One mode is
the execution environment of a group of related commands, and one command
can be executed only in the corresponding command mode. To obtain the valid
commands in the current command mode, just input “?” in the current mode.
3. Commands are divided into information query command and function command.
The information query command serves to obtain some information to be
queried. The function command serves to change the function configuration of
the W140A. The changed configuration is saved in the running configuration
information library. To cancel the function configuration, execute the reverse
command of the former command (that is, no + key word + original command)
4. The CLI provides perfect help system: At any time, you can input “?” to obtain
the related help information.
5. The command inputting provides the fuzzy match function: Once the
information input by the user is enough for determining a command, it is not
necessary to input the full spell.
6. The CLI provides the command history function: You can select a historical
command for executing through “↑” or “↓” of the keyboard.

Zte ZXR10 Specifications

General

Product Series	ZXR10
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Switching Capacity	256 Gbps
Forwarding Performance	96 Mpps
Humidity	10% to 90% (non-condensing)