Zte ZXR10 User Manual

Chapter Error! Style not defined. Error! Style not defined.
5-21
Parameter description:
Name Range Description
isp-name 1~255 characters Name of an ISP which has been created.
timeout 1~65535 Hold time of the RADIUS authentication (unit: s)
5.4.18 Command to Configure SNMP Module
1. snmp access-host
Command mode: Configure mode
Function: Add and delete host IP addresses allowed to access
Command format: wlan (config) #[no] snmp access-host A.B.C.D
Parameter description:
Name Range Description
A.B.C.D IP address
Host IP addresses (up to 10) in dotted decimal
format (A.B.C.D)
2. snmp access-mode
Command mode: Configure mode
Function: Allow all hosts or hosts in the server-list to access this agent
Command format: wlan (config) #snmp access-mode {all|list}
Parameter description:
Name Range Description
{all|list} all, list
all: All users are allow to access
list: Users in server-list are allowed to access
3. snmp community
Command mode: Configure mode
Function: Configure the SNMP access community string and its access right
Command format: wlan (config) #snmp community comstr {read-only|
read-write}
wlan（config）#no snmp community comstr

Zte ZXR10 Specifications

General

Product Series	ZXR10
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Switching Capacity	256 Gbps
Forwarding Performance	96 Mpps
Humidity	10% to 90% (non-condensing)