Zte ZXR10 User Manual

ZXR10 WAS (V1.0) W140A Outdoor Wireless Access Point / Bridge User’s Manual
5-8
Parameter description:
Name Range Description
time-value 60~3600
DHCP server address lease time (unit: s), 60s by
default
4. dhcp server run
Command mode: Configure mode
Function: Start, stop or restart the DHCP server
Command format: wlan (config) # dhcp server run run-flag
Parameter description:
Name Range Description
run-flag start, stop, restart
start: Start the DHCP server
stop: Stop the DHCP server
restart: Restart the DHCH server
5. dhcp server start-flag
Command mode: Configure mode
Function: Configure the start flag of the DHCP server for the restart of the
system
Command format: wlan (config) # dhcp server start-flag {true|false}
Parameter description:
Name Range Description
{true|false} True, false
Start flag of the DHCP server. If it is set to true, it
will be started when the system is restarted. If
false
,
the DHCP server will not be started.
5.4.4 Discover commands
1. discover device
Command mode: Configure mode
Function: Configure the multicasting address for the integrated management and
the port number of the equipment
Command format: wlan (config) #discover device A.B.C.D [0~65535]

Zte ZXR10 Specifications

General

Product Series	ZXR10
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Switching Capacity	256 Gbps
Forwarding Performance	96 Mpps
Humidity	10% to 90% (non-condensing)