Zte ZXR10 User Manual

ZXR10 WAS (V1.0) W140A Outdoor Wireless Access Point / Bridge User’s Manual
3-2
802.11 driver RS232 driver Ethernet driver BSP
R01
DB
Layer-2 supporting system
802.1x STP Other L2 protocol
IP
TCP/UDP
IAPP
TFTP
RADIUS Client
DHCP Server
SNMP
HTTP
TELNET
Security system
OMS
Fig. 3.1-2 W140A Software Structure
The software of W140A comprises the basic service subsystem and network
management subsystem.
● The basic service subsystem consists of these items: 802.11b AP drive, 802.3
Ethernet drive, transparent bridge connection, load balance, TCP/IP protocol
stack, dynamic address distribution, static MAC address filtration, and VLAN.
● The network management subsystem consists of SNMP Agent, telnet command
line configuration module, WEB page configuration module, and GUI integrated
management module.
3.2 Units/Components
W140A Rear Control Panel is shown in Fig. 3.2-1
Ethernet cable and feeder To the ground
To
antenna
12
Fig. 3.2-1 W140A Rear Control Panel

Zte ZXR10 Specifications

General

Product Series	ZXR10
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Switching Capacity	256 Gbps
Forwarding Performance	96 Mpps
Humidity	10% to 90% (non-condensing)