Zte ZXR10 User Manual

Chapter Error! Style not defined. Error! Style not defined.
5-13
5.4.8 Command to Exit Configuration Mode
Command mode: Configure mode
Function: Exit configure mode and enter privileged Mode
Command format: wlan (config) #exit
5.4.9 Commands to Configure IAPP (Load-balance)
1. iapp balance
Command mode: Configure mode
Function: Set the load-balance group ID and nominal capacity
Command format: wlan (config) #iapp balance group-id capability
Parameter description:
Name Range Description
group-id 1~65535 Load-balance group ID
capability 1~30 Nominal capacity
2. iapp enable-flag
Command mode: Configure mode
Function: Enable or disable load balance and the restriction to the maximum
number of users allowed
Command format: wlan (config) #iapp enable-flag {disable|balance|max-user}
Parameter description:
Name Range Description
{disable|balance|
max-user}
disable, balance,
max-user
disable: Disable the IAPP function. Neither
load-balance nor the restriction to the maximum
number of users will be enabled.
balance: Enable load-balance
Max-user: Enable the restriction to the maximum
number of users

Zte ZXR10 Specifications

General

Product Series	ZXR10
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Switching Capacity	256 Gbps
Forwarding Performance	96 Mpps
Humidity	10% to 90% (non-condensing)