ACH550-UH User’s Manual 1-327
Technical data
Materials
Material Specifications
Drive enclosure
R1…R6:
• PC/ABS 2.5 mm, color NCS 1502-Y (RAL 90021 / PMS 420 C and 425 C)
• Hot-dip zinc coated steel sheet 1.5…2 mm, thickness of coating 100
micrometers
• Cast aluminium AlSi
• Extruded aluminium AlSi
R7…R8: Sheet metal
Package
R1…R6: Corrugated board, expanded polystyrene, plywood, raw wood (heat
dried). Package wrap consists of one or more of the following: PE-LD plastic
wrap, PP or steel bands.
R7…R8: Wood pallet
Disposal
The drive contains raw materials that should be recycled to preserve energy
and natural resources. The package materials are environmentally compatible
and recyclable. All metal parts can be recycled. The plastic parts can either be
recycled or burned under controlled circumstances, according to local
regulations. Most recyclable parts are marked with recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors and printed
circuit boards can be landfilled. The DC capacitors contain electrolyte and the
printed circuit boards contain lead, both of which will be classified as hazardous
waste within the EU. They must be removed and handled according to local
regulations.
For further information on environmental aspects and more detailed recycling
instructions, please contact your local ABB distributor.
To Next Page
Loading...
Need help?
General
