Name: ABB ACS580-07-0495A-4
Brand: ABB
Rating: 5 (1 reviews)

Default Chapter9

Table of Contents9

1 Safety Instructions17

2 Introduction to the Manual25

3 Operation Principle and Hardware Description29

4 Mechanical Installation43

5 Guidelines for Planning the Electrical Installation53

Contents of this Chapter53
Limitation of Liability53
Selecting the Supply Disconnecting Device53
Selecting the Main Contactor53
Protecting the Motor Insulation and Bearings54
Examining the Compatibility of the Motor and Drive54
- Requirements Table55
Selecting the Power Cables57
- General Rules57
- Typical Power Cable Sizes58
- Alternative Power Cable Types58
- Motor Cable Shield59
Selecting the Control Cables60
- Shielding60
- Signals in Separate Cables60
- Signals Allowed to be Run in the same Cable60
- Relay Cable Type60
- Control Panel Cable Length and Type60
Routing the Cables60
- Separate Control Cable Ducts61
- Continuous Motor Cable Shield or Enclosure for Equipment on the Motor Cable61
Implementing Thermal Overload and Short-Circuit Protection62
- Protecting the Drive and Input Power Cable in Short-Circuits62
- Protecting the Motor and Motor Cable in Short-Circuits62
- Protecting the Motor against Thermal Overload62
Protecting the Drive against Ground Faults63
- Residual Current Device Compatibility63
Implementing the Emergency Stop Function63
Implementing ATEX-Certified Thermistor Protection63
Implementing the Safe Torque off Function63
Implementing the Power-Loss Ride-Through Function64
- Units with Line Contactor (Option +F250)64
Supplying Power for the Auxiliary Circuits64
Using Power Factor Compensation Capacitors with the Drive64
Implementing a Safety Switch between the Drive and the Motor64
Using a Contactor between the Drive and the Motor65
Implementing a Bypass Connection65
- Example Bypass Connection66
  - Switching the Motor Power Supply from Drive to Direct-On-Line66
  - Switching the Motor Power Supply from Direct-On-Line to Drive67
Protecting the Contacts of Relay Outputs67
Connecting a Motor Temperature Sensor to the Drive I/O68

6 Electrical Installation69

7 Control Unit83

8 Installation Checklist93

13 Dimension Drawings137

14 Safe Torque off Function141

15 Optional I/O Extension Modules153

Further Information173

Brand	ABB
Model	ACS580-07-0495A-4
Category	Controller
Language	English

ABB ACS580-07-0495A-4 User Manual

Table of Contents

Questions and Answers:

ABB ACS580-07-0495A-4 Specifications

Related product manuals