22 Introduction to the manual
Electrical installation gives instructions on wiring the drive.
Control unit contains the default I/O connection diagram and references for the
descriptions of the terminals and technical data of the control unit.
Installation checklist contains a list for checking the mechanical and electrical installation
of the drive.
Start-up describes the start-up procedure of the drive.
Fault tracing describes the fault tracing possibilities of the drive.
Maintenance contains preventive maintenance instructions.
Technical data contains the technical specifications of the drive, eg, the ratings, sizes and
technical requirements, provisions for fulfilling the requirements for CE and other
markings.
Dimension drawings contains example dimension drawings of the drive.
Safe torque off function describes the Safe torque off function of the drive and gives
instructions on its implementing.
Optional I/O extension modules describes optional IO extension modules, their installation,
start-up, diagnostics and technical data.
Related manuals
See List of related manuals on the inside of the front cover.
Categorization by frame size and option code
Some instructions, technical data and dimension drawings which concern only certain
frame sizes are marked with the symbol of the frame size (R10 or R11) The frame size is
marked on the type designation label, see page 34.
The instructions, technical data and dimension drawings which concern only certain
optional selections are marked with option codes (such as +L504). The options included in
the drive can be identified from the option codes visible on the type designation label. The
option selections are listed in section Type designation key on page 35.
Quick installation, start-up and operating flowchart
Task See
Plan the electrical installation and acquire the accessories needed
(cables, fuses, etc.).
Check the ratings, required cooling air flow, input power connection,
compatibility of the motor, motor connection, and other technical
data.
Guidelines for planning the
electrical installation (page 49)
Technical data (page 117)
Check the installation site. Ambient conditions (page 126)
To Next Page
Loading...
Need help?
General
