2.2.2 Technical data
Weight, robot
The table shows the weight of the robot.
WeightRobot model
280 kgIRB 2600/IRB 2600 ID
Note
The weight does not include tools and other equipment fitted on the robot.
Mounting positions
The table shows valid mounting options for the manipulator.
NoteInstallation angleMounting option
0°Floor mounted
90°Wall mounted
180°
i
Suspended
Contact ABB for further in-
formation about acceptable
loads.
0-15°Tilted
i
IRB 2600-20/1.65 type C, IRB 2600-12/1.65 type C is not available for suspended installation.
Note
The actual mounting angle must always be configured in the system parameters,
otherwise the performance and lifetime is affected. See Setting the system
parameters for a suspended or tilted robot on page 61.
Continues on next page
Product manual - IRB 2600 45
3HAC035504-001 Revision: AD
© Copyright 2009-2023 ABB. All rights reserved.
2 Installation and commissioning
2.2.2 Technical data
To Next Page
Loading...
Need help?
General