7.5 Weight specifications
Definition
In installation, repair, and maintenance procedures, weights of the components
handled are sometimes specified. All components exceeding 22 kg (50 lbs) are
highlighted in this way.
To avoid injury, ABB recommends the use of a lifting accessory when handling
components with a weight exceeding 22 kg. A wide range of lifting accessories
and devices are available for each manipulator model.
Example
Following is an example of a weight specification in a procedure:
NoteAction
CAUTION
The robot weighs 2300 kg.
All lifting accessories used must be sized accord-
ingly!
350 3HAC039838-001 Revision: C
© Copyright 2013 ABB. All rights reserved.
7 Reference information
7.5 Weight specifications