3.3.4 Inspecting, balancing device bearings and piston rod guide ring
Location of balancing device
The figure shows the location of the balancing device.
xx1000001237
Balancing deviceA
Guide ring (not visible in this figure)B
Required equipment
NoteArt.noEquipment
3HAB3537-1Grease
Loctite 243-Locking liquid
Content is defined in section
Standard tools on page 351.
-Standard toolkit
These procedures include refer-
ences to the tools required.
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
Continues on next page
3HAC039838-001 Revision: C 111
© Copyright 2013 ABB. All rights reserved.
3 Maintenance
3.3.4 Inspecting, balancing device bearings and piston rod guide ring