ABB M10 Series User Manual

—
41 Assign local/remote function to digital input
—
52 MD control access assigned via configuration
MD control access
MD control is independent of either local or
remote control mode in M10x. However MD
control can be further assigned under local
group or remote group or even to both.
Assigning MD control can be through parameter
configuration (Fig 52) or through a hardwiring
switch connected to the DI. (Fig 53)
—
53 MD control access assigned via hardwiring switch to DI1
0 6 .CO N T R O L AC C E S S 63

ABB M10 Series Specifications

General

Brand	ABB
Model	M10 Series
Category	Controller
Language	English