Technical data 113
Technical data
What this chapter contains
This chapter presents the technical data for the inverter.
DC Input data and solar array requirements
Inverter type PVS300-TL- 3300W-2 4000W-2 4600W-2 6000W-2 8000W-2
Nominal solar array power 3400 W 4200 W 4800 W 6200 W 8300 W
Maximum solar array power 3700 W 4500 W 5200 W 6700 W 8900 W
Operational voltage range, MPPT 335 V to 800 V
Maximum solar array open circuit
voltage
900 V
Nominal operational voltage 480 V
Starting voltage level for grid feeding 370 V when actual grid voltage is at nominal level. The
starting voltage level increases and decreases as the
grid voltage varies.
Wake up voltage 250 V
Maximum solar array short circuit
current
10.5 A 12.7 A 14.6 A 19.0 A 25.4 A
Maximum inverter back feed current to
the array
25.4 A (back feed current limited by the string fuses)
Number of MPP trackers 1
Number of parallel input connections 4
Connector type Quick connector 30A, Multicontact MC4,
types PV-KBT4/6 (DC+) and PV-KST4/6 (DC-)
Reverse polarity protection type Short circuit diode, monitored
Insulation monitoring Impedance measurement between DC terminals and
ground
Surge protection SPD between all DC terminals and ground, monitored
To Next Page
Loading...
Need help?
General