16 Safety
General safety
WARNING! Ignoring the following instructions can cause physical injury or
death, or damage to the equipment.
Before turning on the inverter and putting it into service:
• Take care of any permits and approvals required by local authorities.
• Inform the respective utility company about the grid connection.
• Make sure that all system equipment is suitable for operation.
• Perform necessary tests and measurements at the solar array and electrical grid
side.
• Wear hearing protection if the inverter is situated in a noisy location.
Safely selecting the country
When the inverter is turned on for the first time, the correct installation country must
be selected by a qualified, authorized electrician so that the inverter complies with the
requirements of the grid in the installation country. See Start-up on page 77.
During operation:
• Monitor your system regularly. See Output view menu on page 91.
• Perform the required maintenance actions. See Maintenance on page 95.
To Next Page
Loading...
Need help?
General