ABB SACE Tmax XT2 User Manual

1SDH002031A1002 ECN000092998 Rev. B SACE Tmax XT2 – XT4 | 164
Remote
information
From the service connector (via Ekip Connect) or with communication by system bus, it is
possible to access additional information:
Information
Description
HW and Boot version
general module information
Flash CRC status and
result
information on the correctness of the SW in the module
Publish enable
configuration
Publish enable status contained in Security File
Configuration file
Name of the file dedicated to the information to be transmitted
(measurements, etc)
Security file
Name of the file dedicated to the information required by the
module for the transmission (addresses, certificates, etc)
Certifying Revocation List
name of file containing revoked certificates
Executable file
name of the executable firmware executable file
Configuration error
error status of the module configuration
Sample time
period of acquisition of data from the connected devices
Log time
period within which the acquired data are saved inside the log
Upload time
period (calculated by module) that occurs between each data
transmission
Configured device
Number of modules involved in the network with Hub module
API events polling period
period with which the module communicates with the API
device
Connection client 1, 2, 3
Addresses of the TCP Modbus clients connected to the module
Statistics
Recordings of the last saving operations and percentage of
resources being used
Plant side status
information on quality of the communication with the other
devices
Status Cloud side
Status of errors linked to the TLS session installed between the
module and the server
Application status
indicators of progress of the operations
Status
general module indicators: SNTP status, flash, cable
connection, FW availability, file errors, etc

ABB SACE Tmax XT2 Specifications

General

Brand	ABB
Model	SACE Tmax XT2
Category	Circuit breakers
Language	English