Chapter 3, Preparing the devices
3-18
Accu-Chek Smart Pix user's manual
3.15 Accu-Chek Spirit insulin pump
The Accu-Chek Spirit insulin pump has a built-in infrared
port for data transfer. In order to read data from these
devices, proceed as follows:
• Place the device no more than 10 cm away from the
infrared window on the Accu-Chek Smart Pix device.
Both infrared windows must be facing one another.
• Make sure that your Accu-Chek Spirit insulin pump is
in
STOP
mode.
• Press the button repeatedly until the
DATA
COMMUNICATION
function is displayed.
• Confirm the selection with the button. The built-
in infrared port is now activated, and data transfer
starts automatically.
When data transfer has been completed and the report is
displayed on the screen:
• Press the button to quit data transfer mode.
• Resume operation of the insulin pump (
RUN
mode)
so as not to interrupt the supply of insulin according
to your basal rate for longer than necessary.
15:29 26.05
DATA
COMMUNICATION
DATA TRANSFER
To Next Page
Loading...
Need help?
General