Alcatel-Lucent 7750 SR OS Basic User Manual

File Management Commands
Page 184 7750 SR OS Basic System Configuration Guide
Command usage:
• bof save — Saves the BOF to the default drive (cf3:) on the active
CPM (either in slot A or B).
• bof save cf3: — Saves the BOF to cf3: on the active
CPM (either in slot A or B).
To save the BOF to a compact flash drive on the standby
CPM (for example, the redundant (standby)
CPM is installed in slot B), specify -A or -B option.
Command usage:
• bof save cf3-A: — Saves the BOF to cf3: on CPM in in slot A whether it is active or standby.
• bof save cf3-B: — Saves the BOF to cf3: on CPM in in slot B whether it is active or standby.
The slot name is not case-sensitive. You can use upper or lowercase “A” or “B”.
The bof save and show bof commands allow you to save to or read from the compact flash of the
standby
CPM. Use the show card command to determine the active and standby CPM (A or B).
Default Saves must be explicitly executed. The BOF is saved to cf3: if a location is not specified.
Parameters flash-id — The compact flash ID where the bof.cfg is to be saved.
Values cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:
Default cf3:

Alcatel-Lucent 7750 SR OS Basic Specifications

General

Brand	Alcatel-Lucent
Model	7750 SR OS Basic
Category	Network Router
Language	English