Alcatel-Lucent 7750 SR OS Basic User Manual

System Management
7750 SR OS Basic System Configuration Guide Page 219
Synchronization
Synchronization between the CPMs includes the following:
• Configuration and boot-env Synchronization on page 219
• State Database Synchronization on page 219
Configuration and boot-env Synchronization
Configuration and boot-env synchronization are supported in admin>redundancy>
synchronize
and config>redundancy>synchronize contexts.
State Database Synchronization
If a new standby CPMCFM is inserted into the system, it synchronizes with the active CPM upon
a successful boot process.
If the standby CPMCFM is rebooted, it synchronizes with the active CPM upon a successful boot
process.
When configuration or state changes occur, an incremental synchronization is conducted from the
active CPM to the standby CPM.
If the synchronization fails, the standby does not reboot automatically. The
show redundancy
synchronization
command displays synchronization output information.
If the active and standby are not synchronized for some reason, users can manually synchronize
the standby CPM by rebooting the standby by issuing the
admin reboot standby command
on the active or the standby CPM .

Alcatel-Lucent 7750 SR OS Basic Specifications

General

Brand	Alcatel-Lucent
Model	7750 SR OS Basic
Category	Network Router
Language	English