System Management
7750 SR OS Basic System Configuration Guide Page 289
Reboot
The reboot command reboots the router including redundant CPMs and all IOMs in redundant
systems. If the
now option is not specified, you are prompted to confirm the reboot operation. The
reboot upgrade command forces an upgrade of the boot ROM and reboot.
CLI Syntax: admin
reboot [active | standby] | [upgrade] [now]
Example
: admin# reboot now
The following example displays the reboot command results.
A:ALA-1>admin# reboot now
Are you sure you want to reboot (y/n)? y
Rebooting...
Using preloaded VxWorks boot loader.
...
If synchronization fails, the standby does not reboot automatically. The show redundancy
synchronization
command displays synchronization output information.