Show Commands
Page 450 7750 SR OS Basic System Configuration Guide
Parameters port port-id — Shows the specified port ID of the multi-chassis peer.
lag lag-id — Shows information for the specified LAG identifier.
Values 1 — 200
Output Show Redundancy Multi-chassis Sync Output — The following table describes show redun-
dancy multi-chassis sync output fields:
Sample Output
*A:subscr_mgt_2# show redundancy multi-chassis sync
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Table 40: Show Redundancy Multi-chassis Sync Output Fields
Label Description
Peer IP Address
Displays the multi-chassis redundancy peer.
Description
The text string describing the peer.
Authentication
If configured, displays the authentication key used between this node
and the multi-chassis peer.
Source IP Address
Displays the source address used to communicate with the multi-chas-
sis peer.
Admin State
Displays the administrative state of the peer.
Client Applica-
tions
Displays the list of client applications synchronized between SRs.
Sync Admin State
Displays the administrative state of the synchronization.
Sync Oper State
Displays the operation state of the synchronization.
DB Sync State
Displays the database state of the synchronization.
Num Entries
Displays the number of entries on local router.
Lcl Deleted
Entries
Displays the number of deleted entries made at the local router.
Alarm Entries
Displays the alarm entries on the local router.
Rem Num Entries
Displays the number of entries on the remote router.
Rem Lcl Deleted
Entries
Displays the number of locally deleting entries made by the remote
router.
Rem Alarm Entries
Displays alarm entries on the remote router.
To Next Page
Loading...
Need help?
General
