Common Configuration Tasks
Page 272 7750 SR OS Basic System Configuration Guide
ANCP (Access Node Control Protocol)
Static ANCP string mapping and TOD suites must be configured on separate SAPs or multiservice
sites.
Time of day elements include:
• Egress on page 272
• Ingress on page 275
Egress
This command is an enhancement for specific egress policies including filter lists, schedulers and
QoS. Use this command to create time-range based associations of previously created filter lists,
QoS and scheduler policies. Multiple policies may be included and each must be assigned a
different priority; in case time-ranges overlap, the priority will be used to determine the prevailing
policy. Only a single reference to a policy may be included without a time-range.
Egress Aggregate Rate Limit
Having an egress aggregate rate limit is incompatible with having a scheduler policy. If a SAP or
multi-service-site has a configured egress aggregate rate limit, and the TOD suite assigns a
scheduler policy to it, that assignment cannot be applied: the configured aggregate rate limit takes
precedence over the TOD suite's scheduler policy assignment.
Egress Multicast Group
SAPs may not have a TOD suite while belonging to an egress multicast group (EMG). Since all
SAPs that belong to the same EMG must have the same egress filter, it is imperative to ensure that
the TOD Suite does not modify the egress filter assignment.
To Next Page
Loading...
Need help?
General
