Alcatel-Lucent 7750 SR OS Basic User Manual

Redundancy Commands
Page 388 7750 SR OS Basic System Configuration Guide
Only files stored on the router are synchronized. If a configuration file or image is stored in a location
other than on a local compact flash, the file is not synchronized (for example, storing a configuration
file on an FTP server).
Default enabled
Parameters boot-env — Synchronizes all files required for the boot process (loader, BOF, images, and config).
config — Synchronize only the primary, secondary, and tertiary configuration files.
Default config
synchronize
Syntax synchronize {boot-env | config}
Context admin>redundancy
Description
This command performs a synrchonization of the standby
CPM’s images and/or config files to the
active
CPM. Either the boot-env or config parameter must be specified.
In the admin>redundancy context, this command performs a manually triggered standby
CPM
synchronization. When the standby
CPM takes over operation following a failure or reset of the
active
CPM, it is important to ensure that the active and standby CPM have identical operational
parameters. This includes the saved configuration, CPM and IOM images.
The active
CPM ensures that the active configuration is maintained on the standby CPM. However,
to ensure smooth operation under all circumstances, runtime images and system initialization
configurations must also be automatically synchronized between the active and standby
CPM.
If synchronization fails, alarms and log messages that indicate the type of error that caused the failure
of the synchronization operation are generated. When the error condition ceases to exist, the alarm is
cleared.
Only files stored on the router are synchronized. If a configuration file or image is stored in a location
other than on a local compact flash, the file is not synchronized (for example, storing a configuration
file on an FTP server).
Default none
Parameters boot-env — Synchronizes all files required for the boot process (loader, BOF, images, and
configuration files.
config — Synchronize only the primary, secondary, and tertiary configuration files.
multi-chassis
Syntax multi-chassis
Context config>redundancy
Description This command enables the context to configure multi-chassis parameters.

Alcatel-Lucent 7750 SR OS Basic Specifications

General

Brand	Alcatel-Lucent
Model	7750 SR OS Basic
Category	Network Router
Language	English