Monitor CLI Commands
Page 84 7750 SR OS Basic System Configuration Guide
Default 10
Values 1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
processing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
of the delta.
Sample Output
A:ALA-12# monitor lag 12
===============================================================================
Monitor statistics for LAG ID 12
===============================================================================
Port-id Input Input Output Output Input Output
Bytes Packets Bytes Packets Errors Errors
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
1/1/1 2168900 26450 64 1 0 0
1/1/2 10677318 125610 2273750 26439 0 0
1/1/3 2168490 26445 0 0 0 0
-------------------------------------------------------------------------------
Totals 15014708 178505 2273814 26440 0 0
-------------------------------------------------------------------------------
At time t = 5 sec (Mode: Delta)
-------------------------------------------------------------------------------
1/1/1 0 0 0 0 0 0
1/1/2 258 3 86 1 0 0
1/1/3 82 1 0 0 0 0
-------------------------------------------------------------------------------
Totals 340 4 86 1 0 0
===============================================================================
A:ALA-12#
lsp-egress-stats
Syntax lsp-egress-stats
lsp-egress-stats lsp-name
Context show>router>mpls
Description This command displays MPLS LSP egress statistics information.
lsp-ingress-stats
Syntax lsp-ingress-stats
lsp-ingress-stats ip-address lsp lsp-name
Context show>router>mpls
Description This command displays MPLS LSP ingress statistics information.
To Next Page
Need help?
General
