ALLEN & HEATH CQ-18T User Manual

 102
User Guide V1.1.0 Issue 1
CONTROL (Inserted)
FX Unit Mode – ‘Shared’ allows multiple channels to send signal to the FX Unit
simultaneously, and for the output of the FX Unit to be sent to Main LR, Outputs or
other FX Units at different levels from either the PROCESSING / SENDS screen, or
in the FADER screen. Shared mode is generally used for reverbs and delays.
‘Inserted’ allows the FX Unit to be used in a single input or output channel, to use a
Chorus on a violin for example.
Insert – Select which channel this FX Unit is being used on.
Mix – Adjust the mix from 0% (Dry signal only, no FX audible) to 100% (Wet signal
only, only FX audible)
In/Out – Enable or disable the insert. Note that signal from the channel will still
arrive at the FX unit input when the FX is switched out, but this is not sent back to
the channel so no FX signal will be heard.

ALLEN & HEATH CQ-18T Specifications

General

Frequency range	20 - 20000 Hz
Channels quantity	18 channels
Supported sample rates	96 kHz
Digital sound processing	- bit
Phantom power	48 V
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (typical)	35 W
Output impedance	75 Ω
Built-in display	Yes
Compatible memory cards	SD, SDHC
Master (XLR) out	2
Number of microphone inputs	18
Video capability	-
USB connector type	USB Type-A, USB Type-B

Weight and Dimensions

Depth	242 mm
Width	346 mm
Height	89 mm
Weight	3000 g
Package depth	310 mm
Package width	430 mm
Package height	200 mm
Package weight	3800 g