ALLEN & HEATH CQ-18T User Manual

 114
User Guide V1.1.0 Issue 1
FX Model – Flanger
A Flanger folds the signal back on itself and uses a very fast modulated delay to
create a shifting metallic effect.
Speed – Adjust speed of the modulation.
Depth – Adjust the amount of modulation.
Width – Select the stereo spread of the effect.
 Width has no effect if Flanger is inserted into a mono channel.
Regeneration – Send the flanged signal back through the flanger again.
Flange Mode – Set the range of modulation (how wide the frequency sweep is).

ALLEN & HEATH CQ-18T Specifications

General

Frequency range	20 - 20000 Hz
Channels quantity	18 channels
Supported sample rates	96 kHz
Digital sound processing	- bit
Phantom power	48 V
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (typical)	35 W
Output impedance	75 Ω
Built-in display	Yes
Compatible memory cards	SD, SDHC
Master (XLR) out	2
Number of microphone inputs	18
Video capability	-
USB connector type	USB Type-A, USB Type-B

Weight and Dimensions

Depth	242 mm
Width	346 mm
Height	89 mm
Weight	3000 g
Package depth	310 mm
Package width	430 mm
Package height	200 mm
Package weight	3800 g