ALLEN & HEATH CQ-18T User Manual

 97
User Guide V1.1.0 Issue 1
Sends to an Output
Touch Sends to and select an output to show all send levels to that output on the
fader for each input and FX channel.
With an Output other than Main LR selected, the fader background is coloured blue
to indicate that fader positions are showing the ‘Sends to’ an output other than
Main LR.
 Only FX units in shared mode can be ‘Sent to’ MainLR, an Output or another FX Unit.
 Outputs cannot be sent to other Outputs, so their fader always controls their output
level.
When sending to a stereo output, pan controls are available, though if Follow Main
LR Pan is On for the selected output, the pan value is only displayed and cannot be
adjusted.
The RHS fader is used to control the overall send, or output level. This is a
duplicate of the output channel fader in the OUTPUTS bank view.

ALLEN & HEATH CQ-18T Specifications

General

Frequency range	20 - 20000 Hz
Channels quantity	18 channels
Supported sample rates	96 kHz
Digital sound processing	- bit
Phantom power	48 V
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (typical)	35 W
Output impedance	75 Ω
Built-in display	Yes
Compatible memory cards	SD, SDHC
Master (XLR) out	2
Number of microphone inputs	18
Video capability	-
USB connector type	USB Type-A, USB Type-B

Weight and Dimensions

Depth	242 mm
Width	346 mm
Height	89 mm
Weight	3000 g
Package depth	310 mm
Package width	430 mm
Package height	200 mm
Package weight	3800 g