ALLEN & HEATH CQ-18T User Manual

 33
User Guide V1.1.0 Issue 1
Convert a Quick Channel to a Complete Channel
Any Quick Channel can be converted to a Complete Channel at any time without
any change to the audio.
This allows Quick Channels to be used for a fast setup, but which can then be
switched to Complete Channels for control of individual parameters if desired.
Open the dropdown menu from the top right-hand corner when in a bank view with
the Quick Channel selected, or when viewing the Quick Channel controls of the
channel to be converted, then select Convert.
A pop-up explaining what will happen will appear and give the option to apply or
cancel conversion.
Note that it is not possible for Complete Channels to be converted to Quick
Channels.

ALLEN & HEATH CQ-18T Specifications

General

Frequency range	20 - 20000 Hz
Channels quantity	18 channels
Supported sample rates	96 kHz
Digital sound processing	- bit
Phantom power	48 V
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (typical)	35 W
Output impedance	75 Ω
Built-in display	Yes
Compatible memory cards	SD, SDHC
Master (XLR) out	2
Number of microphone inputs	18
Video capability	-
USB connector type	USB Type-A, USB Type-B

Weight and Dimensions

Depth	242 mm
Width	346 mm
Height	89 mm
Weight	3000 g
Package depth	310 mm
Package width	430 mm
Package height	200 mm
Package weight	3800 g