ALLEN & HEATH CQ-18T User Manual

 14
User Guide V1.1.0 Issue 1
2. Outputs
Main LR
Balanced XLR (1-Ground, 2-Hot/Positive, 3-Cold/Negative)
Nominal +4dBu output (when output meter displays 0dB)
Out 1-6 (CQ-12T, CQ-18T)
Balanced ¼” TRS Jack (Tip-Hot/Positive, Ring-Cold/Negative,
Sleeve-Ground)
Nominal +4dBu output (when output meter displays 0dB)
Out 1-6 (CQ-20B)
Balanced XLR (Pin1-Ground, Pin2-Hot/Positive, Pin3-
Cold/Negative)
Nominal +4dBu output (when output meter displays 0dB)
Headphone/s
Stereo ¼” TRS Jack (Tip-Left, Ring-Right, Sleeve-Ground)
Recallable digital trim control.
3. Footswitch
Mono (TS) or Dual (TRS) ¼” Jack
Can be calibrated for use with momentary or latching switches.

ALLEN & HEATH CQ-18T Specifications

General

Frequency range	20 - 20000 Hz
Channels quantity	18 channels
Supported sample rates	96 kHz
Digital sound processing	- bit
Phantom power	48 V
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (typical)	35 W
Output impedance	75 Ω
Built-in display	Yes
Compatible memory cards	SD, SDHC
Master (XLR) out	2
Number of microphone inputs	18
Video capability	-
USB connector type	USB Type-A, USB Type-B

Weight and Dimensions

Depth	242 mm
Width	346 mm
Height	89 mm
Weight	3000 g
Package depth	310 mm
Package width	430 mm
Package height	200 mm
Package weight	3800 g