ALLEN & HEATH CQ-18T User Manual

 39
User Guide V1.1.0 Issue 1
Send multiple inputs to one output using the FADER screen
1.
Go to the FADER screen and check that the fader
on the right-hand side is labelled ‘Main LR’. If not,
use the Sends to button to show all available ‘Send
to’ destinations and select Main LR.
2.
Use the tabs at the top of the screen to navigate
between banks of Inputs.
3.
Raise the fader for any Input (or multiple inputs) to
send signal from input channel to the Main LR
output. Touch/Click and drag, or select the fader
and use the Touchscreen rotary control (CQ-12T,
CQ-18T).
4
Adjust the (overall) Main LR output using the fader
on the right-hand side.

ALLEN & HEATH CQ-18T Specifications

General

Frequency range	20 - 20000 Hz
Channels quantity	18 channels
Supported sample rates	96 kHz
Digital sound processing	- bit
Phantom power	48 V
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (typical)	35 W
Output impedance	75 Ω
Built-in display	Yes
Compatible memory cards	SD, SDHC
Master (XLR) out	2
Number of microphone inputs	18
Video capability	-
USB connector type	USB Type-A, USB Type-B

Weight and Dimensions

Depth	242 mm
Width	346 mm
Height	89 mm
Weight	3000 g
Package depth	310 mm
Package width	430 mm
Package height	200 mm
Package weight	3800 g