1756-6.5.3 - December 1999
7-10 PLC-5C to Logix5550 Controller: Unscheduled Messaging
Download the Logix5550 Program
(1)
You do not need any ladder logic in the Logix5550 program. The program
can consist of a single “End” rung.
1. Click on the Communications menu and select Who Active.
2. The following window will appear (Your window may look different
depending upon the drivers and other devices you have installed):
3. Drill down the tree through the 1756-CNB module at node 1 to the
controller in slot 0.
4. Highlight the controller and click on the Download button.
(1)
This example uses RSLogix5000 version 2.25. See Appendix D if you are using version 2.10 or earlier.
To Next Page
Loading...
Need help?
General
