Product Information
4
4" Color Touch Panels with Audio
Specifications (Cont.)
Front Panel Components
(Cont.):
Speakers: • Frequency response 450 Hz - 7 KHz
• 8 ohm
• 1 watt
Audio Levels: • Microphone output:
Line level audio
Differential drive
Programmable gain from 7dB to 50db in 31 steps of 1.5 db (linear taper)
• Audio input:
Line level audio
Differential drive
Programmable gain from -26dB to +34 dB in 31 steps of 2dB each.
Rear Connectors:
AXlink/PWR: • 4-pin 3.5 mm mini-Phoenix connector for communication to the AMX Central
Controller providing both data and power
Audio: • 8-pin 3.5 mm mini-Phoenix connector for audio input/output
Programming Port: • 2.5 mm stereo conductor jack (side mounted)
Compatibility: • Axcess, NetLinx, and Landmark systems
Character Support: • Unicode
®
character support for far-eastern languages such as Chinese.
• Characters for middle-eastern languages such as Arabic are not supported
within the Unicode fonts because they are bi-directional. Buttons with Unicode
fonts can only be created and edited using TPDesign3.
Operating / Storage
Environment:
• Indoor Operating Temperature: 10° C (50° F) to 40° C (104° F)
• Indoor Operating Humidity: 5% to 90% RH (non-condensing)
Included Accessories: • Installation Kit for AXD panels (KA5921-02)
- 2.5 mm stereo conductor programming cable (FG10-817)
- 4-pin 3.5 mm mini-Phoenix data/power connector (41-5047)
- 8-pin 3.5 mm mini-Phoenix audio connector (41-5083)
- Drywall clip set:
2 -drywall clamps and 2- #6 (2" long) screws (62-5924-05)
- 6 included blank buttons (pre-mounted into the AXD chassis)
- One bag containing 12 custom buttons (2 embossed/10 pad-printed)
(65-6004)
- Set of three Detachable Faceplates with corresponding buttons:
- White faceplate (60-5921-40WH) and White button set (60-5921-41WH)
- Black faceplate (60-5921-40BK) and Black button set (60-5921-41BK)
- Beige faceplate (60-5921-40BG) and Beige button set (60-5921-41BG)
• Installation Kit for AXT panels:
- 2.5 mm stereo conductor programming cable (FG10-817)
- 6 included blank buttons (pre-mounted into the AXT chassis)
- 10’ (3.05 m) custom Table Top cable (CA5921-01)
- One bag containing 12 custom buttons (2 embossed/10 pad-printed)