Product Information
5
4" Color Touch Panels with Audio
Cleaning the Touch Overlay
You should clean the touch screen overlay often. Always use clean cotton cloths, and a spray bottle
of cleaning solution consisting of 50% isopropyl alcohol and 50% water.
AC-CP4A/WRB Water-Resistant Faceplate for AXD-CP4/A
AMX now offers a new option - a set of water-resistant bezels for AXD-CP4/A touch panels:
AC-CP4A/WRB (FIG. 2). The faceplate set includes all three (3) color configurations - beige,
black, and white - covered with a thin transparent water-resistant film that covers the entire surface
of the bezel including the touch screen, sensor lens, and pushbuttons. It also includes a rubber-foam
gasket to "seal" the gap between the bezel, the back box and the wall. It is a perfect solution that
brings the power of AMX touch panels into wet and splashy environments inside your house or
office building.
Specifications (Cont.)
Optional Accessories: • AC-CP4A/WRB, Water resistant bezel set for AXD-CP4/A (beige, black, white)
(FG5921-24)
• Axcess programming cable (DB9 to DB9) (FG10-727)
• CB-CP4/A (FG033-10) Conduit/wallbox (includes drywall clips and screws for
installation to studs during the construction phase).
- Conduit/Wallbox should only be mounted to a beam before a drywall is
installed (pre-wall).
• PSN2.8 Power Supply (12 VDC) (FG423-17)
• PSN6.5 Power Supply (12 VDC) (FG423-41)
(recommended for use on the CP4/A)
FIG. 2 Sample AXD-CP4/A and AXT-CP4/A
AC-CP4A/WRB faceplates (Beige, Black, and White)
FG5921-24
To Next Page
Loading...
Need help?
General
