APRILIA C364M User Manual

ENGINE
3 - 49
ENGINES C361M / C364M
3.10.4. REPLACEMENT OF THE DRIVEN PULLEY
SHAFT
• Heat the hub cover and use the specific tool to insert a
new bearing with its screen facing the oil shield.
• Mount the circlip with its concave or radiate part on the
bearing side.
• Support the inner race of the bearing from the outside
of the hub cover with the specific tool positioned under
the press and insert the driven pulley shaft.
• Refit the oil shield flush with the cover

APRILIA C364M Specifications

General

Brand	APRILIA
Model	C364M
Category	Engine
Language	English