C.1 Revisions
The following table lists the technical changes between released issues of this book.
Table C-1 Issue 100765_0000_00
Change Location Affects
No changes, first release. - -
Table C-2 Differences between issue 100765_0000_00 and issue 100765_0000_01
Change Location Affects
Removed mention of JTAG mode from description of MPS3
DAP-Link interface.
2.18 System debug on page 2-50
A.1.6 Debug USB 2.0 connector on page Appx-A-75
All versions
Removed statement that availability of P-JTAG or SWD
depends on the design that you implement in the FPGA.
A.1.5 14-pin F-JTAG ILA connector on page Appx-A-74 All versions
Table C-3 Differences between issue 100765_0000_01 and issue 100765_0000_02
Change Location Affects
Updated document title to match product name change.
Updated text and diagrams to match change of document
title and product name change.
Throughout document. All versions
Added information about remote USB operation.
3.2 Remote USB operation on page 3-57
2.18 System debug on page 2-50
All versions
Updated example configuration application note .txt file.
3.5.3 Contents of the MB directory on page 3-64
All versions
Added information about command-line interface. 3.6 MCC command-line interface on page 3-67 All versions
Table C-4 Differences between issue 100765_0000_02 and issue 100765_0000_03
Change Location Affects
Changed Application Note reference from AN522 to AN524. Additional reading on page 8
2.2 Example Cortex
®
‑
M33 IoT Kit subsystem design
on page 2-21
3.5.3 Contents of the MB directory on page 3-64
All versions
Updated example board.txt. and application note .txt
files.
3.5.3 Contents of the MB directory on page 3-64
All versions
Added Caution about high-value resistors between unused
FPGA pins and connectors J25 and J33, underneath
connector pin list table.
A.2 Arduino Shield connectors on page Appx-A-76 All versions
C Revisions
C.1 Revisions
100765_0000_04_en Copyright © 2017–2020 Arm Limited or its affiliates. All rights
reserved.
Appx-C-91
Non-Confidential