There are four settings
Free Time Programming
This is where you can set in your individual time settings for each day.
Wizard time programming
This setting goes through setting up the programming by asking some
question to help decide what to set up. For example, ‘What time do
you want to enable rooms heating?’ or ‘What time do you want the first
time slot to end?’
Pre-set programs
This setting has pre-set programs called ‘Family program, No lunch
program, Midday program and Always active.
Time program / manual mode
This setting switches between using the time programs that have been
set on the boiler or manual mode
RESET
BACK OK
19°25/07/18 09:00
80°60°
ECO AUTO
Press OK to enter Menu
1.5 bar
From the controller Home screen,
press OK.
1
Turn the selector wheel to highlight
Complete Menu. Press OK.
2
To set in time periods
Time program / Manual
Summer / Winter / OFF
Complete Menu
Option Time program. Press OK.
4
CH Setpoint Temp
Time program
Holiday function
AUTO function
Pump continuous running
Free Time Programming
Wizard time programming
Time program/manual mode
Preset programs
CH Settings is highlighted. Press OK.
3
CH Settings
DHW Settings
Screen Settings
36
To Next Page
Loading...
Need help?
General
