Atag i Series Technical Guide

Annual Service reminder
This function allows a warning message to come up when the annual service is now due. The message will come up on the screen at a given time interval
(months) that an installer has set in the boiler e.g. 12 months. This annual service reminder can also display the installers name and phone number display
on the boiler if it has been entered.
RESET
BACK OK
19°25/07/18 09:00
80°60°
ECO AUTO
Press OK to enter Menu
1.5 bar
From the controller Home screen,
press the BACK and OK buttons
at the same time for 7 seconds
1
Insert Code
007
Save
Insert technical code
Service
8.5
8.5.0
8.5.1
8.5.2
8.5.3
8.5.4
12
1
Months to Next Maintenance
Mainten On Days Act
Main Warn Reset
< Not Available >
SW Version Interface
Main Warn Reset
8.5.2
8.5.2
Do you really want to perform the reset? If you
press OK buton, the reset command will be
executed otherwise, by way of ESC, the previous
page is shown.
Turn the selector wheel to highlight 007 as
the Technical Code. Press OK to Save.
2
Then, turn the selector wheel to
8 Service Parameters. Press OK.
4
Turn the selector wheel to highlight
Complete Menu. Press OK.
3
Technical area
Language, date and time
Complete Menu
Configuration Wizard
Service
Faults
Menu
4
5
6
7
8
Zone 1 Parameters
Zone 2 Parameters
Zone 3 Parameters
<Not Available>
Service Parameters
Service
8.5
8.5.0
8.5.1
8.5.2
8.5.3
8.5.4
12
1
Months to Next Maintenance
Mainten On Days Act
Main Warn Reset
< Not Available >
SW Version Interface
Sched.Maintenance-Call Service
Warning
25/07/18 09:00
01234 567890
INSTALLER DETAILS
If the customer has a ONE
Zone
controller, it also displays
the scheduled maintenance
is due on the screen. It will
not go until the maintenance
warning reset 8.5.2 is carried
out on the boiler.
9
The boiler can also hold the installer’s
company name and phone number. So,
when the annual service reminder comes
up the installer detail will also show if that
function has been set up.
8
When the warning message comes up that
the annual service is due, it can be reset by
selecting 8.5.2. This will reset the service
reminder when a Gas Safe registered
engineer has serviced the boiler. This will
reset it to the selected months period from
when actioned.
7
8.5.1 Maintenance on Days Act,
this should be selected to 1, so the
maintenance reminder comes up after
the selected months period. If set to
zero, then it will be set to o and no
reminder will operate.
Next, turn the selector wheel to
8.5 service. Press OK.
5
Service Param
8
8.1
8.2
8.3
8.4
8.5
Boiler Statistics -2
Boiler
Boiler Temperature
Storage
Service
Service
8.5
8.5.0
8.5.1
8.5.2
8.5.3
8.5.4
12
0
Months to Next Maintenance
Mainten On Days Act
Main Warn Reset
< Not Available >
SW Version Interface
6
8.5.0 Months to next Maintenance
should be set to 12, for 12 months.
40

Atag i Series Specifications

General

Brand	Atag
Model	i Series
Category	Boiler
Language	English