Atlas Copco SmartROC T45--10 User Manual

SmartROC T45-10 4 Operation
30
DialogueBoxforDelayedEngineShutdown
NOTICE
IncreasedWear
Riskofdamagetodieselexhaustfluidinjector.
u Donotbypassthedelayedengineshutdownperiod.
Whenthereisarequirementfortheenginetorunatidlingspeed,adialogueboxisshown
inthecontrolsystem.Itisalwaysrecommendedtowaituntiltheengineisturnedoffauto
matically.IfForceengineshutdownisselected,DESisbypassedandtheengineis
switchedoffimmediately.RepeatedlybypassingDESoftheenginedamagestheDEFin
jector.EachbypassofDESisrecordedintheeventlogintherigcontrolsystemandthe
dieselengineECM.
4.1.7StoppingtheDieselEngine
1.
Setthemodeselector(A)intrammode .
2.
Runtheengineatidlingspeedfor2minutes.
3.
Pressthestopbutton(C)toswitchoffthedieselengine.
NOTICE
IncreasedWear
Riskofdamagetodieselexhaustfluidinjector.
u Donotbypassthedelayedengineshutdownperiod.
è
Theenginemaycontinuetorunatidlingspeedfora17minutes.
4.
Turntheignitionkey(B)to"OFF"positionaftertheenginehasstopped.

Atlas Copco SmartROC T45--10 Specifications

General

Brand	Atlas Copco
Model	SmartROC T45--10
Category	Drill
Language	English